Two Model – Charge & Discharge
Press the blue button for charging and discharging
“CHG” — Charging; “DISCHG” — Discharging;
“ERROR”– install the battery incorrectly or the battery is broken one.
MCU controlled, Safety Protected
Negative delta V (- ∆V) cut-off function (except for 9V batteries), overcharge protection, short circuit protection and non-rechargeable or bad cell detection make it more easier for usage.
For Ni-MH Ni-CD rechargeable batteries: 1/2/3/4 AA, AAA, C, D and 1/2 9V batteries.
Correct Operations and Stockpile for Better Using
* LED will not turn off when fully charged for 9V battery, please remove the 9V battery timely when fully charged.
* Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger.
* Using environment: 0℃ to 40℃, it is normal phenomenon that the battery is warmer than room temperature when charging.
* Do not disassemble or reassemble the charger by yourself for safety reason.
Charging Time Table:
1pcs Battery Type (Ni-MH) Capacity Charging Time (approx)
AAA 500-1200mAh 1-3 hours
AA 1300-2800mAh 1.5-3.5 hours
C 1800-5000mAh 2-6 hours
D 1800-10000mAh 2-10 hours
9V 150-600mAh 5-20 hours
What You Get
EBL Battery Charger x1
User Manual x1
AC Cable x1$14.99 Only – Black Friday Hot Ultra compatible 1-4 AA/AAA/C/D and 1-2 9V Ni-MH/Ni-Cd rechargeable batteries, independent charging slot, can charge different size batteries freely.
MCU controlled, adopts using -∆V intellectual cut-off charging method, automatically turn to trickle charge, prevent the batteries from over-voltage, over-current or over-heat.
AC and DC input design (AC cable provided only), applied to worldwide voltage – AC 100-240V 50/60Hz, convenient everywhere.
Automatically stop charging when detecting improper input voltage, defective or short circuit or non rechargeable batteries.
Constant current charging mode would protect the batteries against current fluctuation and keep using the charger safely.